patterns >
Tiny Nonsense
> Thither









Thither
This Pattern is Retired…but you can (probably) get it in November
I have a lot of patterns! But I also get overwhelmed if I have to deal with them all at once. So I’ve picked 12 of my favorites (the Core Collection) to keep around. Then every few months, I decide on a theme or a technique and make a handful of related patterns (the Rotating Collection) available for a little while (then they go away again).
The other patterns are retired and are not generally available. However, because I know some folks will want them, I make many of the retired patterns available for a few weeks every November. If you want me to tell you when they’re back, subscribe to the mailing list or patreon, and I’ll let you know!
- If you see the buy buttons on this page, you’ve caught it on one of the days it’s available!
- If you don’t see the buy buttons on this page, it’s not currently available.
- If you want to hear when the retired patterns are available (most likely in November), subscribe to the mailing list or patreon, or keep an eye on my instagram.
This is a companion to Hither and Yon (the cuffs and cowl in the pictures at the bottom of this page).
Half the fun of being a knitter is having the very cutest sets of cool weather accessories, right? So when I finished the leafy cuffs, it was only natural I’d make a hat to go with them!
The same beautiful lacy leaves run up the side of this hat. But hats don’t have quite as many curves and bends to contend with as cuffs, so the background here is stockinette instead of ribbing. The leaves finish up nicely and are followed by some tidy decreases (to keep everything centered and all the focus on the pretty lace). The result is a project that’s quick, cute, and a perfect to pair with the cuffs!
The hat is written in three sizes each (castons of 98, 106, and 114 stitches), and you should feel free to adjust your gauge a bit to fine tune the fit of the pieces. Just be sure that you’re working at a gauge that gives you a fabric you like with your chosen yarn!
I recommend working at something around 5, 5.5, or 6 stitches per inch, and I’ve included a table to help you figure out what gauge you’ll want to use for your size. With that range of sizes and gauges, the hats will fit a head between 18.75 and 26.25 inches (with lots of points in between). My hat took about 175 yards of yarn, and you can almost certainly make any size with 225 yards or less.
712 projects
stashed
717 times
- First published: October 2018
- Page created: October 2, 2018
- Last updated: November 4, 2026 …
- visits in the last 24 hours
- visitors right now


