patterns >
Liz Denys
> Castform Weather Charm






Castform Weather Charm
I was really inspired by the Castform Weather Charm object in Pokopia, and wanted to make a crochet version. This pattern is for crocheting a wall hanging amigurumi that is about 9.5 inch/24.1 cm tall, 7 inch/17.8 cm wide, and 3.25 inch/8.3 cm deep.
This pattern is available both on my blog and as a pdf download (also linked on my blog).
I would estimate that this is suitable for an adventurous beginner or intermediate crocheter - I was only about a month into my own crochet journey when I designed this, but it’s worth noting that I have a lot of experience with other yarn and fiber arts and designing and creating 3D-media.
This pattern is designed around DK weight yarn (or equivalent held together) and a 2.0 mm crochet hook (or whatever gives you a good gauge for amigurumi/the buttons - more on the buttons later) for the body, and I used fingering weight yarn and the same 2.0 mm crochet hook for the flippable “dress.” The overall absolute yarn size does not matter, and you should pick a hook for the body yarn that gives you a good tight amigurumi gauge and a hook for the flippable “dress” that lets it drape. Your gauge also matters relative to buttons you pick for the eyes, and I designed this around 15 mm buttons, but you can always wait to pick out buttons after you’ve made the eye masks or figure out the right hook to get a good gauge for the buttons you want to use before making the rest of the pattern.
Yarns I used:
- Light blue: Rowan Felted Tweed in 165 Scree, about 90 yards/82.3 meters
- Medium blue: Rowan Felted Tweed in 215 Ciel, about 7 yards/6.4 meters
- White for around eyes: 2 strands Rowan Fine Lace in 944 White + 2 strands Rowan Kidsilk Haze in 612 White held together (Rowan Felted Tweed doesn’t come in a pure white, and I wanted a lighter weight, part-mohair yarn for the “dress” so I reused them here by estimating that 4 strands of lace weight is roughly DK weight.), about 11 yards/10 meters of the combined 4-strand yarn (20 yards/18.2 meters of each of the two yarns)
- Dark blue: Rowan Felted Tweed in 214 Ultramarine, about 7 yards/6.4 meters
- Light orange: Rowan Felted Tweed in 223 Tango, about 160 yards/146.3 meters
- Bright orange: Rowan Felted Tweed in 198 Zinnia, about 7 yards/6.4 meters
- Light yellow: Rowan Felted Tweed in 181 Mineral, about 11 yards/10 meters
- Dark red-brown: Rowan Felted Tweed in 154 Ginger, about 7 yards/6.4 meters
- White for the flippable “dress”: 1 strand Rowan Fine Lace in 944 White + 1 strand Rowan Kidsilk Haze in 612 White held together (I wanted a part-mohair yarn that ended up about fingering weight for the flippable “dress,” so I used this combination of 2 strands of lace weight to make that), about 120 yards/109.7 meters
Rowan Felted Tweed is pretty different from yarns that are commonly used for amigurumi - cotton, acrylic, and even superwash wools have a lot more tensile strength than Rowan Felted Tweed, so you have to be very, very careful with how to pull things taught. If you pull it too hard or have too much friction against the yarn, it will break. If you use it (or another yarn with low tensile strength), you need to be very gentle and slow when tightening magic rings, finishing loops, and embroidering pieces together. If a break happens, you need to go back a few stitches or so and knot to recombine on a section that hasn’t been pulled thin. If I were buying yarn specifically for this project or amigurumi generally, I would almost certainly choose something with more tensile strength. I adore this yarn for other types of projects, and I used it here because I already have a rainbow’s worth of colors in the line for a blanket and many of the colors used here would only require a small amount. (Also, luckily, the tweed look ended up being something I really embraced - it really made it feel like a “lost relic!”) I would recommend using a DK weight yarn you feel comfortable making amigurumi with!
Rowan Kidsilk Haze, like all mohair/silk blend yarns, has a lovely halo, but it also felts with everything around it nearly immediately. This makes frogging mistakes annoying and difficult.
Other materials needed for this project:
- Stuffing, e.g. yarn, fabric, etc. scraps or polyfill
- Two blue 15 mm buttons: I used 15 mm Powder Blue corozo buttons from Merchant and Mills. The vintage wood-look feel of these corozo buttons matches the vintage nautical vibe I get from using a tweed yarn to make this amigurumi.
- Two brown 15 mm buttons: I used 15 mm Townley Brown corozo buttons from Merchant and Mills.
- If you’re using a yarn with low tensile strength, you probably want to use coordinating scrap yarn of higher tensile strength, embroidery thread, or regular sewing thread to sew pieces together. You can also use non-coordinating scrap yarn or thread and then stitch the yarn tails around it to hide the non-matching stitches. I used similar colors of linen embroidery thread, but I ended up pulling tight enough that stitches weren’t even visible!
- I used about 1 yards/0.9 meters of a light orange linen embroidery thread I had on hand, Studio Flax’s Lyster Linen #293 to sew together the sunny side main body/face. FYI, this embroidery thread is roughly a light fingering weight linen.
- I used about 1.5 yards/1.4 meters of a white linen embroidery thread I had on hand, Studio Flax’s Lyster Linen #211, to sew both main bodies/faces to the flippable “dress” to sew the entire project together.
53453 projects
stashed
50257 times
46114 projects
stashed
56309 times
5677 projects
stashed
6673 times
- First published: November 2026
- Page created: Yesterday
- Last updated: Yesterday …
- visits in the last 24 hours
- visitors right now