Yarn
Fingering weight yarn
(MC) Approximately 55 (95, 210) yards / 50 (90, 195) m
(CC1) Approximately 50 (75, 180) yards / 45 (70, 165) m
(CC2) Approximately 30 (50, 100) yards / 25 (45, 90) m
amirisu Swing (100% Superwash Merino wool; 500 yards / 460 m, 100g)

Sample 1 is shown in (MC) Tsavorite 1 skein, (CC1) Chocolate 1 skein, (CC2) Dreamy Feeling 1 skein
Sample 2 is shown in (MC) Crème au citron 1 skein, (CC1) Marshmallow 1 skein, (CC2) La minuit de Montmartre 1 skein

Needles
US 4 (3.5 mm), 24” / 60 cm (or longer) circular needles
Or, needles required to obtain gauge

Gauge (after blocking)
26 stitches & 36 rows = 4” / 10 cm in St st with US 4 (3.5 mm) needles

Sizes
Finished measurements: width 10¼ (13, 16¾)” / 26 (32.5, 42.5) cm, length 5 (7¼, 11)” / 12.5 (18.5, 28) cm
Sample 1 is in size 2, sample 2 is in size 3

Tools
Removable markers in different colors (2), tapestry needle, waste yarn or stitch holders, a spare needle in US 4 (3.5 mm) (for I-Cord),

Skill Level
●●●○○

Note
A collar worked in sideways in one piece. Beginning from left bodice, front and back are worked in one piece. After front and back are separated, neck opening is worked. Right back is worked, then front and back are resumed to work together. Lastly, I-Cord in CC2 is attached around the collar.
The collar is designed to be worn with either side facing the front. However, in the pattern instructions, the side with the opening is referred to as back bodice.

Yarn
Fingering weight yarn
(MC) 約 55 (95, 210) yards / 50 (90, 195) m
(CC1) 約 50 (75, 180) yards / 45 (70, 165) m
(CC2) 約 30 (50, 100) yards / 25 (45, 90) m
amirisu Swing (100% Superwash Merino wool; 500 yards / 460 m, 100g)

サンプル1: サンプル色は (MC) Tsavorite 1カセ, (CC1) チョコレート 1カセ, (CC2) 夢見がち 1カセ
サンプル2: サンプル色は (MC) シトロンクリーム 1カセ, (CC1) Marshmallow 1カセ, (CC2) モンマルトルの真夜中 1カセ

Needles
US 4 (3.5 mm), 60 cm (またはそれ以上) の輪針
または, ゲージの取れる太さの針

Gauge (ブロッキング後)
US 4 (3.5 mm) の針を使用し, メリヤス編みで26目 & 36 段 = 10 cm

Size
出来上がり寸法:
幅 1 (2, 3) = 26 (32.5, 42.5) cm
丈 1(2, 3) = 12.5 (18.5, 28) cm
サンプル1はサイズ2, サンプル2はサイズ3を着用

Tools
別糸またはステッチホルダー, とじ針 , US 4 (3.5 mm)のスペアの針 (I-cord作成用), 違う色の段数マーカー (2)

Skill Level
●●●○○

Note
本体を左身頃から前後一緒に横編みで編む. 途中前後身頃を分けて編み, ネックのカーブを編む. 右後ろ身頃を編んだ後, 再び前後身頃を一緒に編む. 本体を編み終えたら全ての縁にCC2を使用しI-Cordを編み付ける.
どちらを前にして着用しても良いデザインとなっているが, パターン内では開きがある方を後身頃として説明している.