patterns >
Nicole ThorsonKnits' Ravelry Store
> Gossamer Tee


















Gossamer Tee
The Gossamer Tee is worked from the top down, mainly in the round. The back shoulder is cast on first, followed by neck shaping. The front left and right are picked up, neck shaping is worked, and then you will connect the front left and right. After working the top back and top front right and left, you will join in the round and work the body. Sleeves are picked up, shoulder shaping is worked back and forth, followed by working in the round to the desired sleeve length. The collar is then picked up and worked in the round.
Sizing available
A, (B, C, D), (E, F, G),(H, I) to fit bust measurement of:
28-30,(32-34, 36-38, 40-42),(44-46, 48-50, 52-54),(56-58, 60-62)” or 71-76,(81-86, 91.5-96.5, 101.5-106.5),(111.5- 117, 122-127, 132-137),(142-147, 152-158) cm
The top has 2-4 inches (5-10.25 cm) positive ease built into the sizes. There is a schematic provided so you can adjust the size made based on the ease you would like.
Suggested Yarn: sport weight
Sample Yarn: KnitPicks Upcycle Alpaca Sport
Yardage: About 550, (610, 700, 790), (885, 990, 1070), (1100, 1290) yards
Materials: sport weight yarn, circular needles, double pointed needles, 3 stitch markers, scrap yarn or stitch holder, measuring tape, darning needle
Gauge: 16 stitches and 24 rows per 4x4 inch (or about 10.25 cm) square wet blocked. You will need to meet this gauge in the round and worked flat
Needles:
Main: US 8 - 5.00 mm circular (24 - 40 inches and 16 inches for sleeves) or needles needed to obtain gauge.
Ribbing: US 6 - 4.00 mm circular or double pointed needles
Techniques: knitting in the round and flat, knitting, purling, decreasing stitches, increasing stitches, holding stitches, bind off, German short rows, wet blocking
Follow me @ThorsonKnits on Instagram for updates and to tag your finished items!
Please do not sell, distribute, or copy this pattern.
For personal use only.
1228 projects
stashed
2772 times
- First published: July 2026
- Page created: July 3, 2026
- Last updated: July 3, 2026 …
- visits in the last 24 hours
- visitors right now


