Kamon by Ksenia Naidyon

Kamon

Knitting
November 2022
DK (11 wpi) ?
25 stitches and 27 rows = 4 inches
in Rib stitch
US 7 - 4.5 mm
1120 yards (1024 m)
Total length at the longest point: 61¾" / 157 cm Width: 15¾" / 40 cm
English Japanese

Yarn
DK weight yarn
Approximately 1120 yards / 1024 m
2 skeins of Miss Babs Yowza (100% Merino wool; 560 yards / 512 m, 227g)
Sample is shown in Old Gold

Needles
A US 7 (4.5 mm) 24” / 60 cm (or longer) circular needle, or straight needles
Or needles required to obtain gauge

Gauge (after blocking)
25 stitches & 27 rows = 4” / 10 cm in Rib stitch with US 7 (4.5mm) needle

Sizes
Total length at the longest point: 61¾“ / 157 cm
Width: 15¾” / 40 cm

Tools
Tapestry needle, waste yarn

Skill Level
●●

Note
The wrap is knit flat starting from the future loose end. Increases shape the diagonal slope of the corner. The body of the wrap is worked in the ribbed pattern incorporating slipped stitches with an applied I-cord edging.
Once the body reaches the required length, ribs transition into the stockinette stitch. Waste yarn is woven through the work every eight rows to mark the future smocking lines. The stockinette section is folded in half and live stitches are grafted to the wrong side of the piece to form a loop. The wrap is blocked.
Tapestry needle threaded with working yarn is used to join together columns of stitches for the decorative smocked effect. This step is repeated to form sculptural rhombuses throughout the stockinette fabric.

If you have any question, tips for knitting, etc., please post in amirisu group. amirisu will coordinate with the designer to answer your questions.
Thank you!


Yarn
DK weight yarn
約 1120 yards / 1024 m
MISS BABS Yowza (100% Merino wool; 560 yards / 512 m, 227g), 2 カセ
サンプル色はOld Gold

Needles
1× US 7 (4.5 mm), 24” / 60 cm (もしくはそれ以上の長さ) の輪針, もしくは2本棒針
またはゲージが取れる太さの針

Gauge (ブロッキング後)
US 7 (4.5 mm) の針を使用し, リブ編みで 25目 & 27 段 = 10 cm

Sizes
総丈: 157 cm
スカーフ下端の幅: 40cm

Tools
とじ針, 別糸, ステッチホルダー

Skill Level
●●

Notes
往復編みで編むスカーフ. 下端から増目しながら編んでいき, 両端はすべり目でI-cordエッジを作る. ループ部分はスモッキング位置の目安として別糸を入れ込みながらメリヤス編みで編み, その後半分に折りループを作り本体スカーフとはぎ合わせる.
最後にループ部分にとじ針を使用しスモッキングする.

何かこちらのパターンで質問がある場合は、デザイナーへではなく、amirisuグループの質問ボードにポストして下さい。
よろしくお願いします。