Ridge Rib Sweater by Manmi Choi

Ridge Rib Sweater

Knitting
November 2023
Bulky (7 wpi) ?
17 stitches and 28 rows = 4 inches
in Garter Rib stitch
US 8 - 5.0 mm
US 7 - 4.5 mm
US 6 - 4.0 mm
1000 - 1800 yards (914 - 1646 m)
2XS (XS, S, M, L) XL (2XL, 3XL, 4XL, 5XL)
English French German Japanese Korean ...and 5 other languages show hide other languages
This pattern is available for $8.00 USD buy it now

The sweater is worked from the top down. Start from the back shaping with increases. After the shaping is completed the back is worked until the underarms. Then the stitches are put on hold.
Stitches for the shoulders are picked up along the shaped edge. The front pieces are joined at the neckline and worked to the underarms. Underarm onwards, front and back are joined together and worked in the round.
When the body is complete, stitches for the sleeves are picked up along the armhole opening and worked in the
round to the cuff. The neckband is then picked up to work in 1x1 ribbing.

Sizes
2XS (XS, S, M, L) XL (2XL, 3XL, 4XL, 5XL)

Bust circumference
40½ (41¾, 43, 46, 47) 50 (52¾, 55.5, 60, 62½) in
102.5 (106, 109.5, 116.5, 120) 127 (134, 141, 152, 159) cm

The sweater is designed to have approx. 10-12” / 25-30cm of positive ease at the bust.

Yarn
Snefnug from CamaRoseDK(55% Baby alpaca, 35% Cotton, 10% Wool), 110m/50g
1040 (1080, 1100, 1160, 1200) 1250 (1300, 1370, 1450, 1500) yards
950 (990, 1010, 1060, 1100) 1140 (1190, 1250, 1320, 1370) meters

Needles

  • Large: US 8(5mm) - 32” / 80cm circular needles for the body. 16” / 40cm circular needles for the sleeves
  • Medium: US 7(4.5mm) - 32” / 80cm circular needles for the hem and cuff
  • Small: US 6(4mm) - 16” / 40cm or 32” / 80cm circular needles for the neckband

Gauge
17 stitches 28 rows, 4”(10cm) square in pattern stitch with the large needles after blocking

Notions
Stitch markers, stitch holders, tapestry needle


サイズ
2XS (XS, S, M, L) XL (2XL, 3XL, 4XL, 5XL)

胸囲
102.5 (106, 109.5, 116.5, 120) 127 (134, 141, 152, 159) cm
プルオーバーは25-30cm程の余裕を持ったデザインになっています。


CamaRoseDKのSnefnug(ベビーアルパカ55%、コットン35%、ウール10%)、110m/50g
950 (990, 1010, 1060, 1100) 1140 (1190, 1250, 1320, 1370) メートル

  • 大サイズ: 5mm - 80cmまたは100cm輪針(前後身頃平編み)、40cm輪針(袖)
  • 中サイズ: 4.5mm - 80または100cm輪針(前後身頃ゴム編み段、袖ゴム編み段)
  • 小サイズ: 4mm - 40cmまたは100cm輪針(衿)

ゲージ
17目28段、5mm針、10×10cm、模様編み、洗濯後ブロッキング

その他必要なもの
ステッチマーカー、ステッチホルダーまたは余分の糸、とじ針、糸切りバサミ


Der Ridgeribsweater wird von oben nach unten gearbeitet. Beginn auf der Rückseite und forme die Schultern mit Zunahmen. Nachdem die Formung abgeschlossen ist, wird die Rückseite bis zu den Achselhöhlen bearbeitet. Dann werden die Maschen noch verschoben. Entlang des geformten Randes werden die Maschen aufgenommen. Die linken und rechten Vorderteile werden separat gestrickt, um den Halsausschnitt zu formen. Beide Vorderteile werden am Halsausschnitt zusammengefügt und bis zum Armloch gearbeitet. Um den Armausschnitt weiter zu formen, werden der Vorderteil und der Rückenteil vereinigt und in Runden gestrickt. Wenn der Rumpf fertig ist, werden die Maschen für die Ärmel entlang des Beginns des Armlochs aufgenommen und in Runden zur Manschette gearbeitet. Dann werden die Knopfleiste und das Halsbündchen aufgenommen, um im 2x2 Rippenmuster gearbeitet zu werden.

Größen
2XS (XS, S, M, L) XL (2XL, 3XL, 4XL, 5XL)

Brustumfang
102,5 (106, 109,5, 116,5, 120) 127 (134, 141, 152, 159) cm
Der Sweater sollte einen Bewegungsspielraum von etwa 25-30 cm im Verhältnis zu deinem Brustumfang haben.

Garn
Snefung von CamaRoseDK (55 % Baby Alpaka, 35 % Baumwolle, 10 % Wolle), 110 m / 50 g 950 (990, 1010, 1060, 1100) 1140 (1190, 1250, 1320, 1370) Meter

Nadeln

  • Groß: 5 mm - 80 cm Rundstricknadel für den Rumpf. 40 cm Rundstricknadel für die Ärmel.
  • Mittel: 4,5 mm - 80 cm Rundstricknadel für den Saum und die Bündchen.
  • Klein: 4 mm - 40 cm oder 80 cm Rundstricknadel für die Halsbündchen.

Maschenprobe
17 Maschen und 28 Reihen ergeben ein 10 cm Quadrat im Muster auf den großen Nadeln nach dem Spannen.

Übrigens
Maschenmarkierer, Hilfsnadeln, Gobelin-Nadel


Ce pull est travaillé du haut en bas. On commence par l’empiècement du dos en formant les épaules avec des augmentations sur l’endroit et l’envers. Ensuite, les mailles sont relevées pour les empiècements gauche et droit du devant, qui sont travaillés séparément. Les pièces du devant
sont jointes au niveau du col et travaillées jusqu’aux aisselles. Puis, le devant et le dos sont joints
et travaillés en rond. Après avoir terminé le corps, les mailles des manches sont relevées autour des emmanchures et travaillées en rond. Enfin, la bande d’encolure est travaillée en rond avec les mailles relevées.

Tailles
2XS (XS, S, M, L) XL (2XL, 3XL, 4XL, 5XL)

Tour de poitrine
102,5 (106) 109,5 (116,5) 120 (127) 134 (141) 152 (159) cm
Le pull est prévu pour être porté avec une aisance positive d’environ 25 à 30 cm.

Laine
Snefnug de CamaRose (Baby alpaca 55%, coton 35%, laine 10%), 110m / 50g
950 (990, 1010, 1060, 1100) 1140 (1190, 1250, 1320, 1370) m

Aiguilles

  • Grandes: 5 mm - 80 cm ou 100 cm aiguilles circulaires pour le corps et 40 cm aiguilles circulaires pour les manches
  • Moyennes: 4,5 mm - 80 cm aiguilles circulaires pour l’ourlet et les poignet
  • Small: 4 mm - 40 cm ou 80 cm aiguilles circulaires pour le col

Échantillon
17 mailles x 28 rangs = 10 cm en suivant le diagramme avec aiguille de 5 mm, après blocage

Accessoires
Anneaux marqueurs, arrêts de maille ou reste de laine, aiguille à laine, ciseaux