Waistcoat Meron by Pascuali Designs

Waistcoat Meron

Knitting
January 2023
both are used in this pattern
yarn held together
Light Fingering
+ Lace
= DK (11 wpi) ?
18 stitches and 34 rows = 4 inches
in Halbpatent
US 8 - 5.0 mm
1094 - 2165 yards (1000 - 1980 m)
XS/S - 5XL
English German
This pattern is available for €5.50 EUR buy it now

DE
Die lange Weste MERON wird nahtlos von oben nach unten im Halbpatent gestrickt. Beginnend mit der Sattelschulter werden anschließend Rücken- und Vorderteile separat gestrickt und in Höhe der Achseln zu einem Stück verbunden. Die Zunahmen werden durchgehend doppelt gearbeitet, damit das Halbpatent einen flüssigen Verlauf hat. Merino Baby und Manada zusammen verstrickt unterstreichen die Struktur des Musters und machen die Weste zudem angenehm leicht. Sie sitzt locker auf den Schultern und ist schön lang geschnitten mit tiefen Armausschnitten.

Die Größen entsprechen folgendermaßen dem Brustumfang: XS/S (M/L; XL/XXL; 3XL/4XL; 5XL) = 76 - 82 (90 - 98; 107 – 117; 127 - 137; 147) cm Brustumfang (am Körper gemessen). Die lange Weste hat eine lockere Passform mit durchschnittlich 5 bis 9 cm Mehrweite. Beispiel: Wenn du einen Brustumfang von 90 cm hast, dann strickst du die Weste in Größe M/L und sie sitzt dann mit reichlich Mehrweite sehr lässig.Beachte, dass sich die Weste beim Tragen noch etwas in die Länge zieht.

Du brauchst:
5( 6; 7; 8; 9) x 50 g Pascuali Merino Baby (100 % Schurwolle, Bio Merino) in Farbe A
5 (6; 7; 9; 10) x 25 g Pascuali Manada (45 % Mohair, 25 % Seide, 15 % Yakwolle, 15 % Schurwolle) in Farbe B
Farben des Originaldesigns siehe Bild:
Farbe A: #305 Beige
Farbe B: #205 Beige
Rundstricknadel 5 mm, 100 - 120 cm (Körper)
Rundstricknadel 5 mm, 60 cm (Armblenden)
oder Nadeln entsprechend der Maschenprobe
4 Maschenmarkierer
Maschenraffer oder Garnreste zum Stilllegen von Maschen
Wollnadel und Schere
Optional: 5 Knöpfe

EN
The MERON waistcoat is knitted in rows from the top down. The shoulder yoke is worked as a saddle shoulder. Then the front parts and the back part are knitted separately and joined again under the armpits. All increases are worked as double increases so that the pattern continues to flow harmoniously. It is knitted double stranded with Merino Baby and Manada. This uncomplicated waistcoat is knitted in Half Fisherman ́s rib stitch and has a nice, long cut with deep armholes. The waistcoat lies loosely on the shoulders and falls along the body with a straight cut.

The sizes correspond to the bust circumference as follows: (XS/S (M/L; XL/XXL; 3XL/4XL; 5XL) = 30 -32 (35 - 39; 42 -46; 50 - 54; 58 – 76; 82)“ / 76 - 82 (90 - 98; 107 – 117; 127 - 137; 147) cm breast circumference (measured at your body). The long waistcoat has a relaxed fit and should be worn with a positive ease of 2 – 3.5” (5 – 9 cm). Example: If you have a bust circumference of 35“ (90 cm), you should choose size M/L for a generous positive ease. The waistcoat will have enough room to be layered even over thicker garments. Please note that the waistcoat will stretch a bit with wear.

You need:
5( 6; 7; 8; 9) x 50 g (1.76 oz) Pascuali Merino Baby (100 % virgin wool, organic merino) in colour A
5 (6; 7; 9; 10) x 25 g (0.88 oz) Pascuali Manada ( 45% mohair, 25% silk, 15% yak wool, 15% virgin wool) in colour B
Colours of the pictured sample:
Colour A: #305 Beige
Colour B: #205 Beige

US 8 (5 mm) circular needle, 40 – 48” (100 - 120 cm) for the body
US 8 (5 mm) circular needle, 24” (60 cm) for the armhole finishing or needle sizes required to get gauge
4 Stitch markers
Stitch holders or waste yarn
Tapestry needle and scissors
Optional: 5 buttons