Finished dimensions: 63” long, 6” fringe, 12” wide.
_______________________________________

90” warp - threaded each slot of 8 dent heddle. (Lesson learned - the entire width of the loom is not really useable. The threads on the outside were much tighter because they rolled off the dowel and directly onto the cloth beam during warping. This caused the scarf to pucker because the edges were under a lot more tension and therefore shorter. The threads relaxed a bit after blocking - enough for the puckering to go away - but the weft is distorted at the edges.)

I accidentally threaded two ends through one of the holes. The second picture from the bottom is a close up of the results of that mistake.