Cylinder 72 on Imperia

Cylinder tension 2
Ribber tension 1. (This is too tight to easily work. Next time use tension 2 and heel Spring instead.)
1x1 rib 1 round.
Ribber out of work for 2 rounds
Ribber back in work.
Ribber tension 2.
Total 5rounds.
Switch to 3x1 rib.
Change cylinder tension to 4.
Continue to 95rounds.
Remove ribber needles for sole leaving just ribber needles for top of foot.
Continue to 100rounds. (For pre heel section.)

Stop with carrier in front.
Ribber out of work.
Transfer ribber sts to cylinder to work heel.
Remove ribber.
Lift rear half of stitches.
Heel Spring on.
Work 1 heel row.
Break yarn at left.
Work heel. 1up to 12sts left
Then 1up, 2down.
End heel yarn carrier on left.
Break yarn and join pink.
Remove heel Spring.
Crank to front.
All needles down.
Transfer ribber needles back to ribber.
Ribber in work.
Crank around watching needles all catch.
77 rounds for foot. (177 total)
Stop with carrier in front.
Ribber out of work.
Transfer ribber needles, remove ribber.
Continue to 80rounds.
Heel Spring.
Work toe as heel in contrast yarn.