pinkoknitter > notebook > projects > Penguins Plaid Scarf

Penguins Plaid Scarf
  • Project
Expand
Yarn left from warping. I started with 1 ball white, 2 balls gold, and one ball yellow
Yarn left from warping. I started with 1 ball white, 2 balls gold, and one ball yellow
Both of my wound warp chains. After I finished, i realized I made a mistake when winding the second bout. Instead of two ends of white, there should be two ends of black. I decided to wind a tiny bout of two strands of black to replace the white when I put the warp on the lease sticks.
Both of my wound warp chains. After I finished, i realized I made a mistake when winding the second bout. Instead of two ends of white, there should be two ends of black. I decided to wind a tiny bout of two strands of black to replace the white when I put the warp on the lease sticks.
The two white strands should have been black. I could go ahead and weave as is, but I think the black will look a lot better, so I'm going to correct the mistake when I warp the loom
The two white strands should have been black. I could go ahead and weave as is, but I think the black will look a lot better, so I'm going to correct the mistake when I warp the loom
Counting thread; 1-inch groups of 10 threads.
Counting thread; 1-inch groups of 10 threads.
The second bout wound but still on the warping frame.
The second bout wound but still on the warping frame.
The first warp chain.
The first warp chain.
The first bout still on the warping frame.
The first bout still on the warping frame.
First bout in progress
First bout in progress
I secured the warping frame onto my dining room table using the clamps that came with my RH looms. It worked well. The warping frame didn't budge.
I secured the warping frame onto my dining room table using the clamps that came with my RH looms. It worked well. The warping frame didn't budge.
© pinkoknitter
Equipment addition March 2020--a Leclerc table top warping mill unassembled
Equipment addition March 2020--a Leclerc table top warping mill unassembled
The Leclerc table top warping mill assembled. The assembly was easy peasy, although I did need to use a rubber mallet to get the uprights all the way into the cross pieces.
The Leclerc table top warping mill assembled. The assembly was easy peasy, although I did need to use a rubber mallet to get the uprights all the way into the cross pieces.
© pinkoknitter
photos above © pinkoknitter
unless otherwise noted
Finished
October 19, 2018
October 2018

Penguins Plaid Scarf

Project info
Weaving
Tools and equipment
Julia
Yarn
10 epi
Brown Sheep Nature Spun Sport
Goldenrod
Brown Sheep Nature Spun Sport
601 Pepper
Brown Sheep Nature Spun Sport
740 S Snow
Notes

This is my very first project on my brand new floor loom, a Glimakra Julia 8/8 CM loom, which is currently set up as a 4/5 countermarch.

100 ends at 10 epi threaded with a straight draw (4,3,2,1) using a 12-dent reed (1,1,0,1,1,1,1,1,0,1,1,1…), plain weave, balanced weave (I hope). The warp is 4.5+ yards.

viewed 41 times
Finished
October 19, 2018
October 2018
About this yarn
Nature Spun Sport
by Brown Sheep
Sport
100% Wool
184 yards / 50 grams

11519 projects

stashed 11987 times

pinkoknitter's star rating
  • Project created: October 19, 2018
  • Updated: March 5, 2020