Jack and the Beansock by Maike Schroeder

Jack and the Beansock

no longer available from 1 source show
Knitting
February 2015
Fingering (14 wpi) ?
36 stitches and 39 rows = 4 inches
in stranded stockinette
US 0 - 2.0 mm
US 1 - 2.25 mm
US 1½ - 2.5 mm
394 - 437 yards (360 - 400 m)
69 sts, 79 sts
English German
This pattern is available from payhip.com for €4.00.

The pattern is available on Payhip and on LoveCrafts

As of 24 June 2020 the pattern is no longer available on Ravelry.

These stranded socks are knit from the cuff down and incorporate a heel flap with a striped gusset. In order to keep the vine pattern intact the gusset decreases are placed on the sole.
Since the pattern just defines “rounds” and “rows” it works equally well for double pointed needles or Magic Loop.

The socks are mirrored and can be knit in two circumferences: 69 and 79 stitches (18 and 20 cm or 7.2 and 8 inches).

There are two leg lengths to choose from. The short leg is only 16 cm/6.4 inches long (with an option to shorten it by about 2 cm/0.8 inches). The long leg is 17,5 cm/7 inches long (with an option to lengthen it even further).
The foot comes in two lengths, too. The short foot will be approx. 23 cm/9.2 inches long. The long foot will be 26 cm/ 10.4 inches long. Both lengths can be fine tuned during the knitting of the toe. The leg and foot lengths can be freely combined and each sock can be knit in either the small or the large circumference. For example, a sock with a small circumference (69 stitches) can come with a short leg and a long foot.

There are different charts for each of the short and the long options. The two circumferences are achieved by skipping a few stitches marked in each chart. Be careful to choose the right chart for the chosen length.
Because there are no pattern repeats the charts are quite large. To make up for the massive charts most of the floats have a maximum length of seven stitches.


Diese Jacquard-Socken werden vom Bündchen zur Spitze gestrickt und haben eine Herzchenferse mit einem gestreiften Zwickel. Um das Rankenmuster nicht zu unterbrechen, befinden sich die Zwickelabnahmen zentriert in der Sohle.
In der Anleitung sind lediglich „Runden“ und „Reihen“ beschrieben, daher eignet sie sich gleich gut für die Verwendung von Nadelspielen oder Magic Loop auf einer Rundnadel.

Die Socken können in zwei Umfängen gestrickt werden: 69 und 79 Maschen. Das entspricht 18 und 20 cm Umfang.

Weiterhin können mehrere Längen gewählt werden: Ein kurzer Schaft mit 16 cm Länge und ein langer mit 17,5 cm. Der kurze Schaft kann weiter gekürzt und der längere beliebig verlängert werden.
Auch für den Fuß können zwei Längen gewählt werden: Kurz, mit 23 cm Gesamtlänge oder lang mit 26 cm Gesamtlänge. Bei beiden Fußlängen kann beim Stricken der Spitze eine Feinabstimmung vorgenommen werden.

Schaft- und Fußlängen sind frei kombinierbar und jede Kombination kann mit dem größeren oder dem kleineren Umfang gestrickt werden.
Beispielsweise kann eine fertige Socke mit einem Umfang von 69 Maschen einen kurzen Schaft und einen langen Fußteil haben.

Für jede Länge gibt es eigene Diagramme. Die kleineren Umfänge werden durch Auslassen von im Diagramm markierten Maschen erreicht. Es ist darauf zu achten, das richtige Diagramm für die jeweils gewählte Länge zu benutzen. Weil es keine Musterwiederholungen gibt, sind die Diagramme groß. Dafür erstreckt sich kaum ein Spannfaden über mehr als sieben Maschen.